Powerful cleaning, odor-trapping and non-streaking technology.

Restores like-new luster with no greasy residue.

Free from dyes, films and silicone.

Safe on all surfaces, including plastic, trim, dashes and displays.

Directions for Interior Detailer

  1. Spray AMSOIL Interior Detailer and wipe away with a microfiber towel. For stubborn dirt and debris, agitate with a soft bristle brush and wipe away
  2. Note: For the best results on glass, use AMSOIL Glass Cleaner. For aftermarket tint or products, spray on an inconspicuous area to test before application.

AMSOIL Car Care products are engineered to help vehicles shine brighter.

We put the same attention to detail and commitment to quality into formulating our car-care products as we do in designing high-tech AMSOIL lubricants.

The result: high-performing products that deliver a superior car-care experience through advanced, specialized formulations.

  • Provides strong wear protection to help maximize pump and motor life, reducing maintenance
  • Resists corrosion for long component life
  • Fights sludge to help maintain the cleanliness and operability of pumps, valves, solenoids and other components
  • Resists foam to guard against cavitation and promote efficient operation

Available Pack Sizes

HCG46TP 9.45 L Trade Pack

Manufacturer Specifications

Bosch Rexroth
RDE 90235
DIN
51524-2 HLP
Fives Cincinnati
P-70
GM
LS-2
Parker Hannifin
HF-0
HF-1
HF-2
Sperry Vickers/Eaton
E-FDGN-TB002-E
M-2950-S (ISO 17/14)
US Steel
126

Typical Technical Properties

Typical technical properties for this AMSOIL product range are shown below.

Technical Property HCG32 HCG46 HCG68
ISO VG (ASTM D2422) 32 46 68
Kinematic Viscosity @ 100°C (ASTM D445), cSt 5.7 7.0 9.0
Kinematic Viscosity @ 40°C (ASTM D445), cSt 33.8 46.4 68.3
Viscosity Index (ASTM D2270) 110 106 106
Flash Point (ASTM D92), °C (°F) -228 (442) 246 (475) 264 (507)
Pour Point (ASTM D97), °C (°F) -36 (-33) -33 (-27) -33 (-27)
Four-Ball Wear Test (ASTM D4172B @ 40kg, 75°C, 1200 rpm, 1 hr) 0.55 0.56 0.50
Copper Strip Corrosion Test (ASTM D130) 1A 1A 1A
Foam (ASTM D892), Sequence I, II, III, Test End 0/0, 0/0, 0/0 0/0, 0/0, 0/0 0/0, 0/0, 0/0
Demulsibility (ASTM D1401), Oil/Water/Cuff (min) 40/40/0 (15) 40/40/0 (20) 40/40/0 (20)
FZG A/8.3/90 (Load Stage Fail) 12 12 12

Be The First To Review This Product!

Help other Amsoil Australia users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend

More From This Category