Amsoil Commercial Grade ISO 32 Hydraulic Oil HCG32
For long component life
AMSOIL Commercial-Grade Hydraulic Oil is formulated to protect industrial and mobile hydraulic applications used in tough job-site conditions. It resists oxidation, fights corrosion and inhibits foam to help maintain component cleanliness, promote efficient operation and provide good oil life. AMSOIL Commercial-Grade Hydraulic Oil delivers an optimal mix of price and protection for equipment that typically requires high volumes of hydraulic oil.
Resists Wear
AMSOIL Commercial-Grade Hydraulic Oil is formulated with quality base oils and anti-wear additives to protect pumps, motors, valves and other components against wear. It helps hydraulic systems operate properly and last as designed, reducing maintenance.
Helps Prevent Foam
AMSOIL Commercial-Grade Hydraulic Oil is formulated with anti-foam agents that help prevent foam. As a result, it reduces sponginess, provides maximum efficiency and helps prevent cavitation that can damage pumps.
Applications
Use AMSOIL Commercial-Grade Hydraulic Oil in high- and low-pressure gear, vane and piston stationary and mobile hydraulic systems, including those with bronze metallurgy.
- Provides strong wear protection to help maximize pump and motor life, reducing maintenance
- Resists corrosion for long component life
- Fights sludge to help maintain the cleanliness and operability of pumps, valves, solenoids and other components
- Resists foam to guard against cavitation and promote efficient operation
Available Pack Sizes
HCG32TP 9.45 L Trade Pack
Typical Technical Properties
Typical technical properties for this AMSOIL product range are shown below.
| Technical Property | HCG32 | HCG46 | HCG68 |
|---|---|---|---|
| ISO VG (ASTM D2422) | 32 | 46 | 68 |
| Kinematic Viscosity @ 100°C (ASTM D445), cSt | 5.7 | 7.0 | 9.0 |
| Kinematic Viscosity @ 40°C (ASTM D445), cSt | 33.8 | 46.4 | 68.3 |
| Viscosity Index (ASTM D2270) | 110 | 106 | 106 |
| Flash Point (ASTM D92), °C (°F) | -228 (442) | 246 (475) | 264 (507) |
| Pour Point (ASTM D97), °C (°F) | -36 (-33) | -33 (-27) | -33 (-27) |
| Four-Ball Wear Test (ASTM D4172B @ 40kg, 75°C, 1200 rpm, 1 hr) | 0.55 | 0.56 | 0.50 |
| Copper Strip Corrosion Test (ASTM D130) | 1A | 1A | 1A |
| Foam (ASTM D892), Sequence I, II, III, Test End | 0/0, 0/0, 0/0 | 0/0, 0/0, 0/0 | 0/0, 0/0, 0/0 |
| Demulsibility (ASTM D1401), Oil/Water/Cuff (min) | 40/40/0 (15) | 40/40/0 (20) | 40/40/0 (20) |
| FZG A/8.3/90 (Load Stage Fail) | 12 | 12 | 12 |
Be The First To Review This Product!
Help other Amsoil Australia users shop smarter by writing reviews for products you have purchased.
We Also Recommend
More From This Category
